1. Advanced settings after installing the app
Things to prepare
STEPS compatible components
Model
SHIMANO STePS
Wireless unit

EW-EN100
System information display / cycle computer

SC-E6100

SC-E7000
Procedure for starting the app and connecting the wireless
1. Review the ‘Terms of use’ and press “Agree“

2. Review the ‘Warning’ and ‘Notice’ and press “Agree“

3. Start up the bike Bluetooth® LE connection device
Turn on the bike power or perform any operation

* Operation is required from both the bike and the app to start the connection
Put the bike in “Advertising Mode” (waiting for connection)
By starting the bike or performing any operation such as operating the assist switch, a waiting for connection signal is broadcast from the wireless equipment for 15 seconds
4. Tap the flashing “” in the status bar

* This operation is not required for initial startup.
5. Select the wireless unit to connect

6. Connection is complete

2. Display operation function using D-FLY switch
By configuring each app, you can change screens safely without taking your hand off the handle. Discover the best way to use it.
This section introduces how to set switch operations using the D-FLY wireless data transmitter.
Things to prepare
STEPS compatible components

Model
SHIMANO STePS
Wireless unit

EW-EN100
System information display / cycle computer

SC-E6100

SC-E7000
Setup Procedure
E-TUBE PROJECT
Start the E-TUBE PROJECT app and assign a D-FLY Ch. to a switch.
1. Tap “Customize” on the menu screen

2. Tap “Switch unit”

3. Select the switch to be linked

4. Tap the switch corresponding to the settings you want to change

5. Tap D-FLY to display settings

6. Select the D-FLY Ch. from 1-4

7. Tap “”

8. Tap “”

E-TUBE RIDE
Start the E-TUBE RIDE app and assign a D-FLY Ch. to a switch.
Set the D-FLY Ch. and the action on the app screen.
1. Tap “” on the status bar

2. Tap “Shifting switch”

3. Tap “Move view to left” or “Move view to right”

4. Select a channel and action to assign to D-FLY

* The channel set in E-TUBE PROJECT must be used
* Perform the action you set to check whether the action is executed correctly.